|
|
Versatile semiautomatic
Edge banding machine R-18 is designed for gluing of the edge material:
ABS, PVC, melamine, veneer, plastic, acryl.
- The machine works with curved and straight parts.
- The edge material is fed into a zone of gluing and is cut off
from the roll by pneumatic drive. Edge banding machine R-18 has
several modes.
- The edge material feed into a zone of gluing:
- limit switch
- pedal.
- The edge cutting off the roll:
- limit switch
- pedal
- counter.
- Heat regulator with rapid temperature adjustment up to 250°С.
- Standby.
- ‘Batch gluing’ mode.
General and Technical characteristics:
| Workpiece feed:
| manual
|
| Edge material feed:
| automatic
|
| Edge cutting off:
| automatic
|
| Workpiece material:
| Particle board, MDF, wood
|
| Edge material:
| PVC, ABS, melamine, veneer, plastic, acryl
|
| Edge material thickness:
| 0,5mm - 3,0mm
|
| Edge material width:
| 16mm - 55mm
|
| External processed radius:
| not limited
|
| Internal processed radius:
| 25 mm
|
| Speed regulation of the edge material feed:
| 3 to 5 m/min
|
| Heating power:
| 1.8 kW
|
| Total electric power:
| 2.0 kW
|
| Power supply:
| 220V/380V
|
| Working air pressure:
| 4 – 6 atm
|
| Special requirements:
| ground loop availability, compressor availability
|
| Warranty:
| 24 months
|
*click on the picture to see the bigger size
|
|
